Author Topic: [N2] Nano's Noobs 103 - Crewing a metajunker  (Read 19992 times)

Offline BlackenedPies

  • Member
  • Salutes: 134
    • [Duck]
    • 30 
    • 45
    • 45 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #15 on: April 15, 2015, 10:14:41 am »
Quote from: MagKel
The junker is yet in advantage compared to a pyra or goldfish thanks to the combination of higher turning rate, high acceleleration, longer "ground resistance" and the possibility to rapidly bring 3 rebuild tools on the balloon with ease while maintaining hull and all engines. Pair it with the inherent weaknesses of the blender and a proper junker is to be approached with caution, i would call their (junker) chances 40/60


Goldfish are good against Junkers due to their speed and high disable. A competent fish is almost as good a hard counter as a cheese mobula (merc double art).  It's hard enough fighting a fish with 3 engineers and two buff hammers including a spanner mallet buff. Fighting with a gunner and without buffs won't work against a good fish.

The fish doesn't need caution, they avoid fire and rush. 1v1 it doesn't matter if the fish gets disabled by the long range side. They rush in and have the heavy gun ready. Once the carro or burst hwatcha shoots the junker is locked down. The left side cannot kill a fish fast enough and the right side cannot disable. A good fish won't sit by and get shot.

Sure a junker can tank and maneuver but that's all they can do once they're locked down. They can only hope the fish makes a big mistake or ally helps. Turn rate and acceleration don't matter against a fish. Tanking is losing.


"the possibility to rapidly bring 3 rebuild tools on the balloon with ease while maintaining hull and all engines".

The hull engi can never leave position no matter what (they also help bottom) so unless the gunner moves up you can't have more than 2 tools.

Junkers should not fight fish 1v1.
« Last Edit: April 15, 2015, 10:20:23 am by BlackenedPies »

Offline David Dire

  • Member
  • Salutes: 62
    • [SkBo]
    • 21 
    • 34
    • 32 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #16 on: April 15, 2015, 11:33:20 am »
Quote from: MagKel
The junker is yet in advantage compared to a pyra or goldfish thanks to the combination of higher turning rate, high acceleleration, longer "ground resistance" and the possibility to rapidly bring 3 rebuild tools on the balloon with ease while maintaining hull and all engines. Pair it with the inherent weaknesses of the blender and a proper junker is to be approached with caution, i would call their (junker) chances 40/60


Goldfish are good against Junkers due to their speed and high disable. A competent fish is almost as good a hard counter as a cheese mobula (merc double art).  It's hard enough fighting a fish with 3 engineers and two buff hammers including a spanner mallet buff. Fighting with a gunner and without buffs won't work against a good fish.

The fish doesn't need caution, they avoid fire and rush. 1v1 it doesn't matter if the fish gets disabled by the long range side. They rush in and have the heavy gun ready. Once the carro or burst hwatcha shoots the junker is locked down. The left side cannot kill a fish fast enough and the right side cannot disable. A good fish won't sit by and get shot.

Sure a junker can tank and maneuver but that's all they can do once they're locked down. They can only hope the fish makes a big mistake or ally helps. Turn rate and acceleration don't matter against a fish. Tanking is losing.


"the possibility to rapidly bring 3 rebuild tools on the balloon with ease while maintaining hull and all engines".

The hull engi can never leave position no matter what (they also help bottom) so unless the gunner moves up you can't have more than 2 tools.

Junkers should not fight fish 1v1.

Too true, salute.


However, I do know Kirk managed to bring enough skill, luck, and weird weapon combos onto his Junker which could effectively counter Blender's. However, that requires extreme skill.

Offline Sammy B. T.

  • Member
  • Salutes: 154
    • [Duck]
    • 23 
    • 45
    • 45 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #17 on: April 17, 2015, 02:27:09 pm »
Basically against a junker as a blenderfish there is functionally no bad direction to engage from. Against a pyra you HAVE to not be in front of the pyra in order to effectively fight it. You need good positioning to have the carro shoot the balloon.






BTW to the dude asking about armor. Get it buffed. Junker armor is very central and a great candidate for buffing.
« Last Edit: April 17, 2015, 02:29:39 pm by Sammy B. T. »

Offline ShadedExalt

  • Member
  • Salutes: 76
    • [♫]
    • 10 
    • 17
    • 12 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #18 on: April 18, 2015, 10:36:01 am »
BTW to the dude asking about armor. Get it buffed. Junker armor is very central and a great candidate for buffing.

Yeah, but 1 clip of buff gat can strip any armor, even buff gally.

Offline c-ponter

  • Member
  • Salutes: 14
    • [Gent]
    • 24 
    • 43
    • 10 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #19 on: April 18, 2015, 11:03:39 am »
BTW to the dude asking about armor. Get it buffed. Junker armor is very central and a great candidate for buffing.

Yeah, but 1 clip of buff gat can strip any armor, even buff gally.
True assuming you hit every single shot, which realistically isn't going to happen, you will miss a few and even if you don't on a junker especially you will hit at least a few shots into components not the hull

Offline BlackenedPies

  • Member
  • Salutes: 134
    • [Duck]
    • 30 
    • 45
    • 45 
    • View Profile
Re: [N2] Nano's Noobs 103 - Crewing a metajunker
« Reply #20 on: April 18, 2015, 11:31:44 am »
To be clear, the meta junker includes a top engi with wrench buff chem and bottom deck spanner mallet buff lesmok. Gunners shouldn't be on this junker loadout. The bottom engi buffs bottom then prebuffs hull.