Author Topic: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around  (Read 80649 times)

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #60 on: August 27, 2013, 10:05:32 pm »
http://www.youtube.com/watch?v=YLu2HEpm3Yc&feature=youtu.be

Bad quality and a couple of mistakes. But here it is for Squid anyways.

Offline Dutch Vanya

  • Member
  • Salutes: 107
    • [Clan]
    • 38 
    • 45
    • 45 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #61 on: August 28, 2013, 12:00:56 am »
Just watched both videos, sunderland.  Thanks for making them i learned a couple useful tricks.

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #62 on: August 28, 2013, 12:02:11 am »
Thanks, good to hear that people are learning things from them :)

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #63 on: August 28, 2013, 12:40:34 am »
Now, if anybody knows why the quality in those two videos is so awful and what I can do to fix it in future recordings, I'd be overjoyed. I'm in 1920x1080 with (nearly) max settings, I have a Radeon 5800, and I'm not asking OBS to downscale or anything. Anyone know what's going on there?

Offline Captain Smollett

  • Member
  • Salutes: 122
    • [Duck]
    • 11
    • 14 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #64 on: August 28, 2013, 02:33:17 am »
Man Sunder, that squid repair circuit is incredible.  Now I finally get to see first hand how the magical Sunder repair system works.

Offline LazyBoot

  • Member
  • Salutes: 1
    • 3
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #65 on: August 28, 2013, 11:23:59 am »
Now, if anybody knows why the quality in those two videos is so awful and what I can do to fix it in future recordings, I'd be overjoyed. I'm in 1920x1080 with (nearly) max settings, I have a Radeon 5800, and I'm not asking OBS to downscale or anything. Anyone know what's going on there?
A quick look at the videos tells me that the issue is most likely with your bitrate setting. (As in: it's too low)

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #66 on: August 28, 2013, 11:38:09 am »
Now, if anybody knows why the quality in those two videos is so awful and what I can do to fix it in future recordings, I'd be overjoyed. I'm in 1920x1080 with (nearly) max settings, I have a Radeon 5800, and I'm not asking OBS to downscale or anything. Anyone know what's going on there?
A quick look at the videos tells me that the issue is most likely with your bitrate setting. (As in: it's too low)

You're a hero. Thank you so much.

I'll be taking down my Squid and Spire videos once I do re-recordings with better quality.

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #67 on: August 29, 2013, 12:05:15 pm »
Goldfish video is up. A bit short, since there wasn't much to cover.

http://youtu.be/-2H6DKnSQ_E

Offline Alistair MacBain

  • Member
  • Salutes: 23
    • [GwTh]
    • 22 
    • 45
    • 19 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #68 on: August 29, 2013, 12:41:45 pm »
Great shortcuts mate.

Offline Keon

  • Community Ambassador
  • Salutes: 105
    • [Duck]
    • 26
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #69 on: August 30, 2013, 08:31:27 pm »
I want long-fall boots for my engie from portal. I think you'd need them.

Offline Alistair MacBain

  • Member
  • Salutes: 23
    • [GwTh]
    • 22 
    • 45
    • 19 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #70 on: October 05, 2013, 05:14:01 pm »
Not sure if it was mentioned and cant watch atm.
U can hit the mainengine of a Galleon from underneath if u stand on the railing botdeck. I mean that small thingy at the sides of the deck which prevents u from falling ^^.

Offline N-Sunderland

  • Member
  • Salutes: 281
    • [Duck]
    • 15 
    • 45
    • 23 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #71 on: October 05, 2013, 07:01:44 pm »
Yup, that one's been mentioned. So happy it wasn't removed like a couple of other "from underneath" tricks.

Offline Kouhei Sakurai

  • Member
  • Salutes: 2
    • [TA☯]
    • 8
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #72 on: October 11, 2014, 10:44:54 am »
(I hope this isn't considered a necro...)

I've not been able to repair the Squid's hull from the port side. I've tried standing on top of the beam there but somehow I don't see the hull icon appearing. I've also tried moving around a little, but all I've succeeded in doing is falling off the ship. Has this been removed from the game already? Or have I missed the sweet spot?




Offline Wundsalz

  • Member
  • Salutes: 72
    • [Rydr]
    • 45 
    • 45
    • 45 
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #73 on: October 11, 2014, 11:26:21 am »
I've not been able to repair the Squid's hull from the port side. I've tried standing on top of the beam there but somehow I don't see the hull icon appearing. I've also tried moving around a little, but all I've succeeded in doing is falling off the ship. Has this been removed from the game already? Or have I missed the sweet spot?
Unfortunately it has been removed from the game.

Offline Kouhei Sakurai

  • Member
  • Salutes: 2
    • [TA☯]
    • 8
    • View Profile
Re: Hardcore Parkour: A Quick and Dirty Engineer's Guide to Getting Around
« Reply #74 on: October 11, 2014, 11:30:16 am »
Unfortunately it has been removed from the game.

Aw... I was crossing my fingers and hoping it was just me.

Thanks for the really quick reply =D